LFDL Ф450 Aluminum Rod Breakdown Machine with Individual Motors

Alloy rod Break down machine is used to produce aluminum wires sized φ1.6-4.5mm from aluminum rods of φ9.5mm or wire φ2.0- 4.0mm from aluminum alloy rods of φ9.5mm. The drawing capstan is arranged in straight line and in a continuous order. Each twin-capstan is drove by single Servo motor.

It speed gets well along with the electric speed so as to change dies quickly as well as to meet different aluminum material. It is highly praised for easy operation, high efficiency and excellent wire quality. Used for drawing round and irregular line of aluminum and aluminum alloy rod;

Provide straight gear drive and separate motor drive wire drawing machine, at the same time can be selected with single or double head wire drawing machine;

Alloy rod Break down machine is used to produce aluminum wires sized φ1.6-5.5mm from aluminum rods of φ9.5mm or wire φ2.0- 4.5mm from aluminum alloy rods of φ9.5mm.

Each drawing ring is independently driven by a motor. Each compression ratio can be set appropriately, convenient for mold matching. Can meet a variety of grades of aluminum wire drawing.

Optional: annealer can be equipped to realize aluminum alloy wire online annealing;
Optional: single spooler, double automatic spooler, vertical pay-off or combination of various take-up forms;
Using MMI+PLC control system, production line synchronization control, online monitoring, process parameters can be modified in the touch screen, storage, reading, simple and fast operation;
Threading machine, heat exchanger, steam generator and filter are available for customer choice.

Our machine include functions such as overline protection and overvoltage protection.

Inquire now

Introduction
Parameters
Service and Support
FAQ

Alloy rod Break down machine

The drawing capstan is driven by individual motor. It's used for drawing Ф9.5mm aluminum rod or al-alloy rod to round aluminum single wire with different sizes or same section through different drawing drafts, and then coiled by dual spooler, single-spooler or coiler.
Pulley Diameter(mm) Number of Draft Inlet Diameter(mm) Outlet Diameter(mm) Max. Line Speed(m/s) Machine Size Al Al alloy (Length*Width)(m) Al Al alloy Φ450 9 Φ9.5 Φ2.8~Φ 4.5 Φ3.0~Φ5.0 25 29*6 Φ450 11 Φ9.5 Φ2.2~Φ 4.5 Φ2.5~Φ 5.0 30 31*6 Φ450 13 Φ9.5 Φ1.7~Φ 4.5 Φ 1.7~Φ5.0 30 32*6
7 Days X 24Hours After sales service and technical support.

All the machines are equipped with remote trouble shooting communication module, which enable SMT’s engineer providing remote technical support within 24 hours;

By using Wechat, Zoom, Microsoft Teams and other online meeting APP , we can provide technical guiding to support the site trouble shooting.

If necessary, SMT can dispatch professional engineers to provide service and support at customer’s site.
Q Can I visit your factory? A All the customers from both home and abroad are warmly welcomed to visit our company and factory. Q Do you supply the installation and commissioning? A Yes, we do as followings: -As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up. -No-load testing: After machine installed completely, we make no-load testing first. -With-load testing: Usually we will can produce 3 different wires to make load testing. -Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period. Q How do you work on the inspection before delivery? A We will make dynamic balance testing, levelness testing, noise testing, etc. during production. After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

Welcome to submit your inquiry information to us

LFDL Ф450 Aluminum Rod Breakdown Machine with Individual Motors

Products

our engineer will contact with you as soon as possible.

Copper Rod Break Down Machine The drawing capstan is driven by individual motor, the machine is used for drawing Ф8mm copper rod,complete with continuous annealer, dual spooler or coiler.

Free to contact us

Pulley Diameter(mm)	Number of Draft	Inlet Diameter(mm)	Outlet Diameter(mm)		Max. Line Speed(m/s)	Machine Size Al Al alloy (Length*Width)(m)
Pulley Diameter(mm)	Number of Draft	Inlet Diameter(mm)	Al	Al alloy	Max. Line Speed(m/s)	Machine Size Al Al alloy (Length*Width)(m)
Φ450	9	Φ9.5	Φ2.8~Φ 4.5	Φ3.0~Φ5.0	25	29*6
Φ450	11	Φ9.5	Φ2.2~Φ 4.5	Φ2.5~Φ 5.0	30	31*6
Φ450	13	Φ9.5	Φ1.7~Φ 4.5	Φ 1.7~Φ5.0	30	32*6