Contact us
Land Wire Equipment machine
Submarine Cable machine
HOMEProductsLand Wire Equipment machineStranding machineJLY Robot Cables Planetary Laying up Machine
  • planetary cabling machine
  • cables planetary laying up machine
  • cables planetary laying up machine
  • planetary cabling machine
  • cables planetary laying up machine
  • cables planetary laying up machine

JLY Robot Cables Planetary Laying up Machine

1. Description

JLY Robot Cables Planetary Laying up Machine is worked with 100% back twist movement.It is suitable for steel core aluminum stranding wires, aluminum clad steel, bare copper, bare aluminum, power optical cable and stranding of other wire materials. It can be used as laying up of 19/37 cores control cable and steel wire armoring cable. It adopts magnetic hysteresis tension controller to provide bobbin tension. A set of bobbin bottom diameter detector is installed in each section of the cage to automatically detect the change of the position from full bobbin to empty bobbin, and then feed back to PLC, which adjusts the output torque of magnetic hysteresis tension controller to ensure constant tension.

DC main motor drives the stranded body through the ground shaft or AC induction servo motor drives each segment of the stranded body.

JLY Robot Cables Planetary Laying up Machine adopts MMI+PLC control system, pre-setting stranding pitch, stranding direction, automatic tension control and synchronous control of traction and take-up.

2. Application Demonstration

It is suitable for stranding of steel core aluminum stranding wires, aluminum clad steel and other wires.

 It can be used as laying up of 19/37 cores control cable and optical cable.

Share:

Products

  • Introduction

  • Parameters

  • Service and Support

  • FAQ

Control Cables Assembly with Back Twist.

Signal Cables Assembly with Back Twist.

Insulated Cables Assembly such as Robot Cables with Back Twist.

 Reel Size(mm)

Max.RotationSpeed(rpm)

Sing Wire Diameter(mm)

6B

12B

18B

Φ400

140

125

110

Φ1.0~Φ4.0

Φ500

115

105

90

Φ1.5~Φ5.0
7 Days X 24Hours After sales service and technical support.
 
  • All the machines are equipped with remote trouble shooting communication module, which enable SMT’s engineer providing remote technical support within 24 hours;
  • By using Wechat, Zoom, Microsoft Teams and other online meeting APP , we can provide technical guiding to support the site trouble shooting.
  • If necessary, SMT can dispatch professional engineers to provide service and support at customer’s site.
  • Q

    Can I visit your factory?

    A
    All the customers from both home and abroad are warmly welcomed to visit our company and factory.
  • Q

    Do you supply the installation and commissioning?

    A
    Yes, we do as followings:
    -As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
    -No-load testing: After machine installed completely, we make no-load testing first.
    -With-load testing: Usually we will can produce 3 different wires to make load testing.
    -Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.
  • Q

    How do you work on the inspection before delivery?

    A
    We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
    After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

Welcome to submit your inquiry information to us

our engineer will contact with you as soon as possible.

RELATED PRODUCTS

Consulting Products

Free to contact us